How do I fix inaccessible boot device in Windows 11?
Step 1. Connect a USB drive to a computer that is running Windows 10 and is in good condition. Install and launch AOMEI Partition Assistant.
Step 2. Insert the bootable USB into the computer which has a boot problem.
Step 3. You’ll see loaded AOMEI Partition Assistant once login.
Step 4. Select the way of checking errors to perform.
Step 5.
Step 6.
Step 7.
Step 1. Connect a USB drive to a computer that is running Windows 10 and is in good condition. Install and launch AOMEI Partition Assistant.
Step 2. Insert the bootable USB into the computer which has a boot problem.
Step 3. You’ll see loaded AOMEI Partition Assistant once login.
Step 4. Select the way of checking errors to perform.
Step 5.
Step 6.
Step 7.
- Download and install the software.
- It will scan your computer for problems.
- The tool will then fix the issues that were found.
How do I fix inaccessible boot device SSD?
Only one way: Windows performs Startup Repair.
Method 2: Run a system file scan.3:
How to update the IDE ATA/SATA controller driver.
Method 4: Reset BIOS settings.
Method 5: Run a disk check.
Method 6: Or unpublish on Windows.
How do I fix inaccessible boot device error?
Solution Uninstall 1: Recently installed packages.
Solution 2 – Update your drivers
Multiple solutions: Switch the AHCI mode value to “Enabled” in the BIOS.
Solution 4 – Get rid of the Pending Update packages
Solution: Check all files on the drive and make sure they are not corrupted.
How do I fix Windows 10 boot device not found?
Restart your computer and press Esc to enter the BIOS interface.
Press the right arrow key on your keyboard until the Download tab actually opens. “Move hard drive” to any beginning of the boot order showcase by pressing “+” or “-“.
Press F10 to save changes and restart your computer.
Will reinstalling Windows fix inaccessible boot device?
If a worn or corrupt driver is the logical cause of the “Change inaccessible boot device” error, or if a clean install is required, then it really needs to be downloaded. To update your cars, you need to boot into safe mode. In Safe Mode: Right-click “Computer” and select “Time Management” to launch the Computer Management Console.
How to fix no bootable device Windows 10?
Check bios and boot order settings. An incorrectly configured boot order can cause the computer’s boot to be redirected to the wrong drive.
Disconnect and reconnect the following external devices. Loose or corrupted add-ons are the main reason for a missing boot device.
Correct the MBR boot information.
Use sfc to check for corrupted files.
Set the most important partition to Active.
How to fix INACCESSIBLE BOOT DEVICE error on Windows 10?
In the .front .window, right-click the .system .cd/dvd .and select .Repair .MBR .
Choose the best MBR type for your Windows 10 family operating system.
Click Apply to repair and fix INACCESSIBLE_BOOT_DEVICE in mbr in Windows 10.
Why does Windows 10 not boot?
Check the function provided by the driver type. Driver, if it’s your own third party boot driver, make sure you understand what it does.
If the driver is unimportant and has absolutely no dependencies, load the Physics hive, then disable the driver.
If any part of the system stop error shows a file corruption error, run the system file checker offline.
How to fix boot device not found HP Windows 10?
Start or restart your computer.
Press F10 several times during boot to enter the BIOS setup utility.
Check for legacy support and disable it in Enabled System: Configuration > Boot Options > Legacy Support per Boot Options > Legacy Support
If legacy support is DISABLED, go to procedure 3, step 3.
Even worse, individual users get stuck in an endless boot loop where Windows says the SSD should not be available and tries to fix the error, but fails constantly. If you see “Inaccessible boot device”, it means that your computer cannot recognize partition windows on the hard drive it is booting from.
In most cases, the UNABLE BOOT DEVICE error occurs because the boot tablet has failed or is unreadable. During input/output (I/O) initialization, the boot tool driver may have failed to initialize the boot application (which is a hard drive or SSD, perhaps even one of the most efficient SSDs). Other reasons are possible:
Thanks!” Inaccessible boot device is a typical BSOD (Blue Screen of Death) error with mod 0x0000007b. Simply put, the message indicates that Windows lost access to the system partition during startup. If you receive this error after performing a clone, buyers cannot boot Windows 10 for the cloned hard drive normally and access real computer data.
Updated: April 2024
Are you grappling with persistent PC problems? We have a solution for you. Introducing our all-in-one Windows utility software designed to diagnose and address various computer issues. This software not only helps you rectify existing problems but also safeguards your system from potential threats such as malware and hardware failures, while significantly enhancing the overall performance of your device.
- Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
- Step 2 : Click Start Scan to find out what issues are causing PC problems.
- Step 3 : Click on Repair All to correct all issues.
How to fix INACCESSIBLE BOOT DEVICE on Windows 10 SSD?
Learn how to boot from inaccessible devices to Windows 10 SSD below: Step 1: Connect a good USB drive to a computer that is mostly running Windows 10 and is considered to be in good condition. Install and launch AOMEI Partition Assistant. Click “Create on bootable media” on the left and follow the wizard to submit the process.
How do I boot inaccessible boot device?
First, open the Settings app and navigate to Update & Security > Advanced Recovery > Start > Restart Now. After a few seconds, you will probably see a blue screen. Go to Troubleshoot > Advanced Options > Command Prompt Required. Your computer will restart and the trainer will switch to the Command the Prompt app.
How do I fix inaccessible boot device in Windows 11?
Can I Fix Windows 11 Inaccessible_Boot_Device Error?
- Perform a system file scan….
- Perform a disk check.
- Remove… the latest Windows 11 updates. … Run
- Startup Repair. …
- Update your device drivers. … Windows
- Roll 11 for recovery purposes. …
- Reset Windows 11.
How to fix INACCESSIBLE BOOT DEVICE on Windows 10 SSD?
Learn how to fix inaccessible boot drive on Windows SSD 10 below: Step 1: Plug in a USB drive that your Windows 10 computer can use and is in working order. Install and launch AOMEI Partition Assistant. Click “Create Bootable Media” in the left pane and follow the wizard to complete the process.
How do I boot inaccessible boot device?
First, open the Settings app and navigate to Update & Security > Recovery > Advanced Startup > Restart Now. After a few seconds, a blue test will appear. Go to Troubleshoot > Advanced > Command Line Options. Your computer will restart in addition to booting into the command line application.
How do I fix inaccessible boot device in Windows 11?
How to fix Windows Maintenance 11 Inaccessible_Boot_Device error?
- Perform a manual system file scan….
- Perform a diagnostic scan with Check Disk.
- Remove… Latest Windows 11 improvements. … Run
- Startup Repair. …
- Update your device drivers. …
- Go back to Windows 11 to restore a new point. …
- Reset Windows 11.
RECOMMENATION: Click here for help with Windows errors.
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).