Way 1: Perform Windows Startup Repair.
Way 2: Run a system file scan.
Way 3: Update IDE ATA/SATA Controller Drivers.
Way 4: Reset BIOS configuration.
Way 5: Run a Check Disk scan.
Way 6: Rollback or update Windows.
Way 1: Perform Windows Startup Repair.
Way 2: Run a system file scan.
Way 3: Update IDE ATA/SATA Controller Drivers.
Way 4: Reset BIOS configuration.
Way 5: Run a Check Disk scan.
Way 6: Rollback or update Windows.
Solution 1 – Remove some recently installed packages
Solution 2 – Update your drivers
Solution 3: Set the AHCI failover mode setting in the BIOS to Enabled.
Solution 4 – Get rid of “pending service packs”
Solution 5 – Check for any corrupted files on the drive and repair them
In most cases, a device with an INACCESSIBLE BOOT error occurs because the actual boot device is not working or is not being read. During boot or I/O initialization boot, the device driver may not indicate that one of our devices (hard drive or solid state drive, maybe even one of the best solid state drives) can be initialized.
Boot your device in safe mode.
Delete the damaged/damaged file.
Restore the boot configuration data and run CHKDSK.
Restore your device using System Image Recovery.
Reset your PC to factory settings.
7 Ways to Fix Corrupted PFN List Error in Windows 11.
Turn off your computer and wait seven seconds. Press the power button to start the computer and press the F10 key repeatedly to enter each BIOS setup menu. Just press F9 on the BIOS setup screen and load the default BIOS setup options. Press f10 to save the output.
Check boot order and BIOS settings. The wrong boot order will most likely redirect your computer to boot to the wrong drive.
Disable reconnect as external devices. Weakened or corrupted devices are the main reason for missing a bootable device.
Correct the MBR boot information.
Use SFC scan to help you with corrupted files.
Make the main section active.
Windows 11/10 Boot Repair Fix: UEFI boot issue completely on Windows 11/10/8/7 Method 1. Use Startup Repair.for Windows 11/10 Boot Repair.
Method 7: Use diskpart to fix UEFI boot error in Windows 11/10
method . Change BIOS settings.
Method 4: Add Windows 11/10 Boot Repair Disk Drivers
Method 5: Change the mode to sata to restore Windows 11/10 boot.
Reboot and expand support for f11.
Select Troubleshoot.
Select Recovery Manager.
Select System Restore.
Select .first .to .go back to .your .files .(recommended) ..
Click “Next” and follow the instructions on the screen to fully restore the person.
NOTE. Skip this step if your platform is not listed in the table below.
On the System Configuration Services tab, select Hide all services and Microsoft, then click Disable all.
On the Startup tab found in all system selection configurations, open Task Manager.
In the Start section of Task Manager, for each item investment, select the item, and then select Disable.
Close Task Manager.
When launching the System Configuration tab, select OK.
To access most of the app’s settings, go to Update & Security > Recovery > Advanced Startup > Restart Now. A blue screen will appear after a few seconds. Go to Troubleshoot > Advanced > Command Line Options. Your computer will restart and boot into a command line application.
Learn below how to fix boot device not available on Windows 10 SSD: Step 1: Plug your USB flash drive into your Windows 10 computer and it is in good condition. And install AOMEI Partition Assistant. Click “Create Bootable Media” in the left pane and follow the wizard to complete your own process.
How to repair Windows 11 Inaccessible_Boot_Device error?
How to Fix Inaccessible Boot Device Error in Windows 10
How to Fix Unavailable Device Boot Error in Windows 10
Click “Apply” and “Continue” to apply the pending methods. Please restart your computer later. If your company is facing an inaccessible boot device related to Windows 10 SSD, you can fix the problem by uninstalling the photo card driver or rebuilding the MBR with AOMEI Partition Assistant.
First, open the Settings app and navigate to Update to > Security Recovery > Advanced Startup > Restart Now. After a while, a blue screen will appear. Go to Troubleshoot > Advanced Options > Command Prompt. Your personal computer will start and restart this command line application.
Learn how to fix the inaccessible boot tablet in Windows 10. Below: ssd Step 1: Connect your USB drive to a Windows 10-enabled computer in working order. Install and launch Aomei Partition Assistant. Click “Create Bootable Media” in the left pane and follow the wizard to complete the process.
How to fix Windows 11 Inaccessible_Boot_Device error?
How to Fix Inaccessible Boot Device Error in 10
Microsoft Windows
Are you grappling with persistent PC problems? We have a solution for you. Introducing our all-in-one Windows utility software designed to diagnose and address various computer issues. This software not only helps you rectify existing problems but also safeguards your system from potential threats such as malware and hardware failures, while significantly enhancing the overall performance of your device.
How to Fix Inaccessible Boot Device Error in Windows 10
Also, click “Apply” and then click “Continue” to apply the possible operations. Please restart your computer later. If you encounter an inaccessible Windows 10 SSD boot device, you can fix the problem by uninstalling a new graphics card driver or updating the MBR using AOMEI Partition Assistant.
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).