The combination of the two can fix the “Inaccessible Boot Device” error in Windows 10. Enable Windows Safe Mode with Command Prompt, use Windows + S to open the search box, type cmd, and select Run as administrator. In the Command Prompt window, type sfc /scannow and press Enter to execute this command.
Insert the installation USB and boot Windows 10 from it.
In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
Click on ‘Repair your computer’ and select ‘Troubleshoot’.
Click on ‘Advanced options’ and select ‘Automatic Repair’ and select the operating system.
The combination of the two can fix the “Inaccessible Boot Device” error in Windows 10. Enable Windows Safe Mode with Command Prompt, use Windows + S to open the search box, type cmd, and select Run as administrator. In the Command Prompt window, type sfc /scannow and press Enter to execute this command.
Updated May 2024: Stop error messages and fix your computer problem with this tool. Get it now at this linkSolution 1 – Remove recently installed packages
Solution 2 – Update your drivers
Solution 3 – Change AHCI mode to Enabled in BIOS
Solution 4 – Get rid of the Pending Update packages
Solution Test 5: Repair all corrupted files on your hard drive.
Step 1: Open “Command Prompt (Admin)” from the “Power User” menu (“Windows” + “X”). 2: ladder Enter the command “sfc /scannow”, but reboot the system after the project is completed. Running an SFC diagnostic scan should fix the Windows 10 code error for getting rid of an unavailable boot device, and it could be a Windows 10 Unmountable Boot Volume stop code error.
Are you grappling with persistent PC problems? We have a solution for you. Introducing our all-in-one Windows utility software designed to diagnose and address various computer issues. This software not only helps you rectify existing problems but also safeguards your system from potential threats such as malware and hardware failures, while significantly enhancing the overall performance of your device.
Your reactivation PC
To remove the Inaccessible Boot Tool after updating the BIOS, you can simply restart your computer. Click on the Windows icon in the lower left corner of the screen and consider the power option. Then click “Restart”, your computer will restart in a few minutes.
Faulty, incompatible, outdated or infected device drivers are also considered to be the main cause of the inaccessible boot device error in Windows 10 system. You should try to update yours by doing the following: a. Open Device Manager, open the device in the category you want to update the driver for.
Disks are designed to allow certain Windows operating systems to properly use PC hardware. If the flash drives are outdated and incompatible with your Windows operating system, you will most likely encounter an “Inaccessible boot device” error. Here’s how you can improve your drivers to ensure that the problem can be fixed.
Frequent checking for an INACCESSIBLE_BOOT_DEVICE error will occur due to a boot device failure. When initializing the I/O system, the boot device driver may not have initialized the boot device (usually the best hard drive). File body initialization could fail because boot device type data was not recognized.
Re: Inaccessible boot device Thanks for the next step. If you have access to the failed device log files, you can submit an incident report through the Feedback Windows Hub smartphone app. This way the Windows team could look into the issue and learn more about it. Like 0 Reply joecrow replied to Reza_Ameri
First, open the Settings app, go to Update, and tap Security > Recovery > Advanced Startup > Restart Now. After a few moments, a blue screen appears. Go to Troubleshoot > Advanced Options > Command Prompt. Your mobile computing device will reboot and launch a command line type application.
Below you will learn how to fix an inaccessible boot device available on a Windows 10 SSD: Step 1. Connect the USB drive to a Windows workstation PC and the heater is in good condition. Install and run aomei Partition Assistant. Click Create Bootable Media on the left and follow the wizard to complete the process.
How to fix Windows Inaccessible_Boot_Device 11 error?
First, open the Settings app, so go to Update & Security > Recovery > Advanced > Start Restart Now. After a few seconds, a blue screen pop-up window will appear. To resolve this issue, go to > Advanced Options > Command Prompt. Your computer will boot into the application’s command line and boot up.
How to fix inaccessible boot system on Windows 10 SSD is shown below: Step 1. Connect the flash drive to a computer running Windows 10 and in good working order. Install and launch the AOMEI Assistant account. Click “Create Bootable Media” in the left pane and follow the wizard to complete the process.
Can I fix Windows 11 Inaccessible_Boot_Device error?
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).