Error 0xc0000225 means Windows can’t find the files that are used for booting. It may be caused by several factors, such as corrupted MBR, wrong active partition setting, bad sector in system partition, hardware failure, etc. And it usually also comes with a message “Your PC needs to be repaired”, and prompts you can use recovery tools.
Updated April 2024: Stop error messages and fix your computer problem with this tool. Get it now at this linkStep 9: Create a Windows 10 Drive Purchase.
Step 1: Start Windows Automatic Repair.
Step 2: Run SFC manually and check the disk scan. 3:
Repair BCD.
Step 4: Your designated active partition.
Check step three: for faulty hardware.
Delete specific empty EFI partition ?
Fix written by “Run” command in CMD (Command Prompt) ?
Set up a system partition on your amazing PC –
Windows repair of your PC (computer) –
Disable Secure Boot on your PC –
Disable ELAM (Early Launch Anti-Malware) protection –
Are you grappling with persistent PC problems? We have a solution for you. Introducing our all-in-one Windows utility software designed to diagnose and address various computer issues. This software not only helps you rectify existing problems but also safeguards your system from potential threats such as malware and hardware failures, while significantly enhancing the overall performance of your device.
Run Startup Repair.
Fixed BCD boot sector.
Run the SFC/DISM part.
System restore System/image restore.
Using system reset.
You can try disconnecting all external devices connected to the PC (except the keyboard and mouse) and then try to start the PC to see if it starts properly. However, if you still have questions, we may need to restore the boot configuration data file by installing bootable media.
Download and run the Process Monitor tool.
Run the utility that caused error 0xc0000022.
Wait for the error to appear
Click File
Select Event Capture
Select “Filter” (or you can press the CTRL and L keys) to open the process monitoring filter directly.
Filter out all rows that are not directly owned by the application that caused the error.
More such articles
Click start and start typing your guitar for “services.msc”.
“services.msc” should appear in the search results. Open everything with one click.
A new window will be unlocked containing all Windows services on the system.
Find “Windows Update”
Usually right-click Windows and update, then click Stop.
To fix all ten Windows Update errors 0x80070652, follow these steps. Reset the software distribution folder.
Run the Windows Update Troubleshooter
Run the SFC utility
Remove the updates you are looking for
Manually reinstall updated personal folders
How to fix error code 0xc000000e CD if not in Windows 10/8/7? Method 1: Set BIOS settings to default. The BIOS is a program that boots up the computer system as soon as you turn on the computer.
Method 2: CHKDSK utility. The CHKDSK utility is probably a program that automatically scans the entire hard drive and drive if an error occurs.
Method 3: Repair MBR. The MBR is an important structure that allows Windows to boot.
1. Turn on your laptop or desktop computer, press and hold the “F2” key, especially when looking at the screen (if this does not work, you can check the purchase guide to get the exact key type Experienced BIOS). 2. In the Boot section, click Investment, Change Boot Option, and boot from the USB drive.
Whatever the cause, follow the steps below frequently to resolve the issue.
This error code often looks like 0xc0000225: Your computer needs to be repaired. An unexpected error has occurred. Error code: 0xc0000225 You will be prompted to use the recovery tools with the installation media. If the person does not have installation media (such as a new disc or USB device), contact our system administrator or PC manufacturer.
First, the error code: 0xc0000225 Assets Windows cannot find the system files used to boot, also known as (Boot bcd Configuration Data). In other words, if your system files turn out to be corrupted, the computer’s file system is misconfigured, if you have faulty hardware, my error 0xc0000225 will occur.
First, the promo error code: 0xc0000225 means that Windows cannot find the system files used to boot, also known as BCD (boot configuration data). In almost all other cases, if the system files are corrupted, the disk file system has a catastrophic configuration, or you have faulty hardware, you are likely to encounter error 0xc0000225.
Program error: 0xc0000225?. Programming error 0xc0000225 means that Windows can’t find most of the system files it needs to start, possibly by not verifying the digital signature associated with a newly installed device driver or sometimes with an application. The computer was turned off during a Windows update. You need to install an unsigned driver and/or program.
1. Turn on the computer, press and hold the “F2” key where it is associated with the first screen (if this does not work, the exact essence of the BIOS can be found throughout the manual). 2. In the Boot section, click Change Boot Option to use the USB boot drive.
We hope the steps below will resolve your current issue, regardless of the common cause.
This error code will probably be 0xc0000225: Restoring your PC must be damned. An unexpected error has occurred. Error code: 0xc0000225 You need to use the recovery media of the installation media. If you do not provide installation media (such as a CD/DVD or USB device), contact the manufacturer of your control system or PC.
First, the error code: 0xc0000225 Windows means that the system files used for booting, also known as BCD (boot configuration data), cannot be examined. In other words, if the system archives are corrupted, the hard disk file system is configured incorrectly, or your hardware is faulty, error 0xc0000225 will appear.
First, the error code: 0xc0000225 means that Windows cannot recognize the files used to boot, also known as BCD (boot configuration data). In other words, if your system directories are corrupted, the disk file system needs to be set up incorrectly, or if you have faulty hardware, error 0xc0000225 occurs.
Error code: 0xc0000225?. System error 0xc0000225 means that Windows cannot find the system files needed to view or verify the digital label of a newly installed device driver or application. The computer was turned off during a Windows update. You have installed an unsigned programming driver.
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).