How to fix non system disk error or disk error in Windows?
If the “Non system disk or disk error” error message is showing up because your Hard Disk Drive’s boot files have become damaged or corrupt, removing all the non-bootable storage devices, checking on your HDD’s IDE or SATA cable, or setting the right boot priority in BIOS/UEFI should fix the issue.
Remove All Non-System Disks. Similar to the “Boot Device Not Found” issue, the first step to try is to remove the non-system disk from your boot device because the boot
Confirm the Boot Sequence.
Remove and Reinstall the Hard Drive.
Perform Startup Repair.
Repair MBR.
Set System Partition Active.
If the “Non system disk or disk error” error message is showing up because your Hard Disk Drive’s boot files have become damaged or corrupt, removing all the non-bootable storage devices, checking on your HDD’s IDE or SATA cable, or setting the right boot priority in BIOS/UEFI should fix the issue.
Remove All Non-System Disks. Similar to the “Boot Device Not Found” issue, the first step to try is to remove the non-system disk from your boot device because the boot
Confirm the Boot Sequence.
Remove and Reinstall the Hard Drive.
Perform Startup Repair.
Repair MBR.
Set System Partition Active.
Remove All Non-System Disks. Similar to the “Boot Device Not Found” issue, the first step to try is to remove the non-system disk from your boot device because the boot
Confirm the Boot Sequence.
Remove and Reinstall the Hard Drive.
Perform Startup Repair.
Repair MBR.
Set System Partition Active.
- Download and install the software.
- It will scan your computer for problems.
- The tool will then fix the issues that were found.
Why does my computer say Non system disk or disk error replace and strike any key when ready?
This error usually occurs when your computer tries to boot from the wrong memory device. The first thing to check is to remove all storage devices (including DVDs, CDs, floppy disks, USB drives, external hard drives, etc.). Once you’ve done that, restart your PC or laptop and see if it boots up properly.
Here MiniTool introduces the best products that can help in fixing non-system disk or computer errors. Fix 1: Remove all non-system drives.
When troubleshooting a non-system drive or hard drive error, we’ll start by removing the non-system drive from the boot device (remove any non-system drive from the DVD, floppy drive, or eject the detected CD-ROM). on the original hard drive), then reboot the hard drive and see if that worked. Otherwise, try the next solution.
Updated: May 2024
Are you grappling with persistent PC problems? We have a solution for you. Introducing our all-in-one Windows utility software designed to diagnose and address various computer issues. This software not only helps you rectify existing problems but also safeguards your system from potential threats such as malware and hardware failures, while significantly enhancing the overall performance of your device.
- Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
- Step 2 : Click Start Scan to find out what issues are causing PC problems.
- Step 3 : Click on Repair All to correct all issues.
By the way, you may find that Windows 10 is missing a required disk partition. Now you can easily fix new disk or non-system disk error in Windows XP/7/10 step by step with these effective solutions:
When you try to boot the computer you get the error message Non system disk or disk error What is the most likely cause of this error message?
Method 2: Check your hard drive’s IDE or SATA cable If your hard drive’s IDE or SATA cable is faulty or not properly connected, the system may not be able to read the memory and you will most likely get a “non-system drive”. . .” Just connect this special cable properly or buy a new one if the cable is usually damaged/faulty.
How to fix non system disk error or disk error in Windows?
Otherwise, anyone can restart the computer and immediately press a key to enter this BIOS. Then select the following description to select the boot order, and then add the media you want to use as the first boot device. A corrupted MBR or BCD boot sector can cause a raw disk error.
When you try to boot the computer you get the error message Non system disk or disk error What is the most likely cause of this error message?
Method 2: Check the IDE or SATA cable of the hard drive. If your current hard drive’s IDE or SATA cable is damaged or connected incorrectly, the system may not be able to read the primary hard drive and you will probably get a Non-system drive error message. Just connect the cable correctly or buy a new one if the cable is damaged/failed.
How to fix non system disk error or disk error in Windows?
Otherwise, you can restart your computer and just press a key to access your own BIOS. Then follow the description to help you choose the boot order, and then specify the media you want to use as the first boot device. A corrupted boot sector, MBR, or BCD can affect a non-computer system error disk.
RECOMMENATION: Click here for help with Windows errors.
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).