To reset BIOS to default settings, simply enter BIOS and select Restore defaults. You can also try removing the motherboard battery to reset BIOS, but before that make sure you shut down the PC and remove the plug. Then re-insert the battery after waiting for sometime and the problem should be fixed.
Solution 01: Downloading The Latest Driver Go to the computer manufacturer website
Solution 02: Update Driver through Device Manager Tap on Start and select Run
Solution 03: Bios Need to be Updated This issue occurs due to outdated Bios on your window 10
Solution 04: By Uninstalling Microsoft ACPI
Solution 05: By Changing ACPI Mode to S1
Solution 06: By Incapacitating ACPI Mode
Open Device Manager.
Look at the Microsoft ACPI Compliant Control method battery.
Right-click it and select Remove device.
Click the Scan for hardware conversions button and wait.
Let Windows automatically install my new drivers.
Restart his computer.
The ACPI_BIOS_ERROR check error has almost any value starting from 0x000000A5. This test indicates that the BIOS of an Advanced Power Interface (ACPI) computer does not fully comply with the ACPI specification.
ACPI reset command.
Load size 0 IDT and issue a trap (causing multiple errors and resets)
Use the 8042 keyboard controller to pulse the processor’s RESET pin.
Use the ResetSystem runtime UEFI maintenance plan, if available.
Long jump vector to fix (0xFFFF:0000)/triple error.
The Advanced and Power Interface (ACPI) configuration is now an industry specification for cost-effective power management in desktop consulting and mobile computing. ACPI defines how the computer’s BIOS, operating system, keyline, and peripherals interact with each other regarding power consumption.
Turn off someone’s computer.
Hold and Windows key + B.
While holding these buttons, pay attention to the media and hold the power button for 2 or 3 seconds.
Release the power button but hold down the Windows key + B until the BIOS update computer appears until you hear a good beep.
The HP BIOS update filter appears.
Download with the installation of Restoro from a well-known site.
Once the installation process is complete, go to Restoro to run a full configuration scan.
After the scan is complete, click the “Start Recovery” button.
In this case, the new standard parent bus driver enumerates the device, but the Windows acpi driver Acpi.sys is loaded separately into the device stack to generate control methods for any non-standard controls required by the bus driver.
ACPI (Advanced Configuration and Power Interface) is an industry standard for efficient power management of desktop and thin computers. ACPI defines how certain basic input/output systems, operating systems, and peripherals interact with each other regarding power consumption.
Uninstall the Microsoft ACPI Compliant Driver. Open device manager. Find a cluster of Microsoft ACPI-compliant management practices. Right-click and select Remove device. Click the Scan for hardware changes button and wait. Allow Windows to automatically install new software. Restart your computer.
I’m Ahmir, a freelance writer and editor who specializes in technology and business. My work has been featured on many of the most popular tech blogs and websites for more than 10 years. Efficient-soft.com is where I regularly contribute to my writings about the latest tech trends. Apart from my writing, I am also a certified project manager professional (PMP).